Kyoritsu 2300R

Đồng hồ ampe kìm Kyoritsu 2300R, dùng để đo dòng điện xoay chiều, một chiều bằng kìm hở, đo giá trị thực [True RMS]. Hiển thị số.
Kyoritsu 2300R

Kyoritsu 2300R

  • Có chức năng đo RMS.
  • Cảnh báo nơi có điện áp bằng tín hiệu âm thanh.
  • Cho về giá trị 0 ở phép đo dòng 1 chiều với 1 lần bấm.
  • Tự động tắt nguồn.
THÔNG SỐ KỸ THUẬT:
  • Đo dòng điện AC A: 0 ~ 100A
  • Đo dòng điện DC A: 0~ 100A
  • Đường kính kẹp: Ø10mm
  • Tiêu chuẩn: IEC 61010-1 CATIII
  • Nguồn nuôi: R03(AAA)x 2
  • Kích thước: 161.3(L) x 40.2(W) x 30.3(D)
  • Trọng lượng: 110g
  • Phụ kiện: pin, HDSD.
  • TRUE RMS
  • φ10
  • MAX100A
  • DCACA
  • NCV
  • DATAHOLD
  • AutoPowerOff




KEW FORK 2300R can be used in crowded connection boxes,
where cables are very short, and space is too limited to clamp cables
using with a traditional clamp meter.

 
 

True RMS (Root Mean Square) Value Measurement

When load current is not affected by the distortion, both averaging value type and true RMS (root mean square) type clamp meters show the almost same value of about 10A with constant wave-form as the above display samples. However, when load current is affected by some distortions such as inverter, etc...,averaging value type clamp meter indicates 5.5A instead of 9.7A and true RMS type clamp meter indicates 7.9A instead of 9.7A with irregular wave-form. Accordingly, true RMS type clamp meter is recommendable for the measurement of the equipment with inverter control devices.
Due to the use of thyristors, inverters and other energy-saving controllers in recent electric wiring, current waveforms often include harmonic components and are distorted compared to sinusoidal waves (50/60Hz).
 The Kyoritsu True RMS value tester is able to measure distorted waveforms using true RMS since waveforms are being internally calculated continuously. In contrast, when measurements are made with a averaging value tester, errors are generated in the measurement value because the tester cannot continuously track distorted waveforms.

(Compared to the true RMS value tester, measurement values for the averaging value generate more than 30% errors in some cases.)

Current measurement AC A 0 to 100.0A ±2.0%rdg±5dgt (50/60Hz)
DC A 0 to ±100.0A ±2.0%rdg±5dgt
Crest factor 2.5
Non contact voltage Detect AC voltage without contacting with socket wire
During voltage detection, "Hi" flashes and a buzzer sounds
Maximum digit 1,049
Conductor size Max Ø10mm
Safety Standard IEC 61010-1 CAT III 300V Pollution degree 2
Power source R03 (AAA) × 2 (Auto power off: approx.10 minutes)
*Continuous measuring time: AC A approx. 46 hours DC A approx. 52 hours
Dimensions 161.3(L) × 40.2(W) × 30.3(D)mm
Weight 110g (with batteries)
Included Accessories 9113 (Carrying Case)
R03 (AAA) × 2
Instruction Manual

Tác giả bài viết: namphatvq

Nguồn tin: Catalogue Kyoritsu

Tổng số điểm của bài viết là: 873 trong 175 đánh giá
Click để đánh giá bài viết
Từ khóa: giá trị

Những tin cũ hơn

 

Bình Luận Trên Face Book Của bạn