Kyoritsu 5010
Đồng hồ ghi dữ liệu kyoritsu 5010 dùng để ghi dòng rò, dòng tải, điện áp và công suất của các thiết bị.

- 3 kênh đầu vào đồng thời: Dòng rò, dòng tải, và điện áp
- Phân tích chất lượng công suất (chỉ với Model 5020)
- Dung lượng lớn khoảng 60.000 dữ liệu
- Bộ lọc thông thấp => lọc sóng hài.
- Đèn Led nháy sáng khi giá trị dòng và điện áp vượt quá ngưỡng đặt trước.
- Gọi dữ liệu đã ghi.
THÔNG SỐ KỸ THUÂT:

- 3 channel inputs for the simultaneous recording of Leakage Current, Load Current and Voltage
- Large Capacity for storing 60,000 data points
- 60,000 data points can be recorded when 1ch is used, and when all the three channels are used, 20,000 data points per channel can be recorded
- Lowpass Filter will filter out the harmonics (Cutoff Frequency = Approx. 160Hz)
- LED flickers when the preset current value is exceeded
- CALL: Confirmation of recorded data
- The following can be displayed: number of recorded data points, (max+ min+ peak) value for each channel complete with time/date information in the Normal recording mode. (Detected values (i.e. when values are outside preset limits ) can be displayed in other recording modes)
- RECALL: The last 10 recorded data points including time/date can be recalled on the logger display
- Selection of One-time mode or Endless mode
- One-time on: Recording will stop when memory is used up
- One-time off: Overwrite the old data, and store the latest data
- Non Volatile Memory
Recorded data will be retained even if the batteries are exhausted or replaced due to the presence of a nonvolatile memory (guaranteed for 10 years)
- Battery power indicator
Indicates battery voltage in 4-levels
(It is possible to use the logger for a further approx. 24 hours even after the warming symbol is flashing)
- The userfriendly PC software "KEW LOG Soft 2" is supplied
- Supplied with the user friendly software "KEW LOG Soft 2". This permits editing, analysis and graphical display of data.
- The recorded data is downloadable onto a PC via USB cable.
- Continuous measuring time: Approx. 10 days (Alkaline Battery)
Normal Recording Mode
(AC 50/60Hz, Sine wave, Input: 10% or more of the range at CH1)
Range |
RMS Accuracy |
100.0mA |
±2.0%rdg±0.9%f.s.+ Accuracy of Sensor |
Other ranges |
±1.5%rdg±0.7%f.s.+ Accuracy of Sensor |
Crest Factor |
2.5 or less: RMS accuracy (sine) + 2%rdg + 1%f.s. |
*Max, Min and Instant Peak values in Normal Recording mode are just reference values:
their accuracies aren't guaranteed.
Trigger Recording Mode (AC 50/60Hz sine wave)
Range |
Accuracy |
100.0mA |
±3.5%rdg±2.2%f.s.+ Accuracy of Sensor |
Other ranges |
±3.0%rdg±2.0%f.s.+ Accuracy of Sensor |
Capture Recording Mode
Range |
Accuracy |
100.0mA |
±3.0%rdg±1.7%f.s.+ Accuracy of Sensor |
Other ranges |
±2.5%rdg±1.5%f.s.+ Accuracy of Sensor |
Recording mode |
Normal, Trigger, Capture |
Operating system |
Successive Approximation
(CH1 single synchronized sampling) |
Rated max. working voltage |
AC 9.9Vrms, 14V peak value |
Number of input channel |
3ch |
Measuring method |
True RMS |
RMS measuring interval |
approx. 100ms |
Sampling interval |
Normal/Trigger mode : approx. 1.65ms/CH
Capture mode : approx. 0.55ms (waveform: at every 1.1ms) |
Low battery warning |
Battery mark display (in 4 levels) |
Over-range indication |
"OL" mark is displayed when exceeding the measuring range |
Auto power off |
Power-off function operates automatically after a switch remains for 3min. (when recording is stopped) |
Possible measurement time |
Approx. 10 days (with alkaline LR6 batteries) |
Applicable standards |
IEC 61010-1:2001 CAT III 300V Pollution degree2
IEC 61326 (EMC standard) |
Dimensions |
111(L)×60(W)×42(D)mm |
Weight |
Approx. 265g |
Included Accessories |
Alkaline battery LR6×4pcs, 9118 (Carrying case)
PC software "KEW LOG Soft 2", 7148 (USB cable)
Instruction manual, Quick manual, Install manual,
USB Notice sheet |
Optional Accessories |
8146/8147/8148 (Leakage & Load current Clamp Sensor),
8121/8122/8123 (Load current Clamp Sensor),
8129/8130 (Flexible Clamp Sensor),
8320 (AC Adapter),
9135 (Carrying bag), 9119 (Hard carry case),
7185 (Extension cable for sensor) |
Tác giả bài viết: Namphatvq
Nguồn tin: Catalogue Kyoritsu