Kyoritsu 6016
Đồng hồ đo đa năng kyoritsu 6016 dùng để đo thông mạch, điện trở cách điện, điện trở đất, mạch vòng trở kháng, tần số, thứ tự pha, hiệu điện thế, đo PSC và PFC.
- Đo liên tục
- Đo độ cách điện
- Đo trở kháng vòng lặp
- Đo PSC
- Đo PFC
- Đo RCD
- Đo điện trở đất
- Đo điện áp ACV
- Đo chỉ thị pha
- Đo tần số
THÔNG SỐ KỸ THUẬT:
- Đo thông mạch: 20, 200, 2000Ω
- Đo điện trở cách điện: 250V, 500V, 1000V
- Đo mạch vòng trở kháng: L-PE, L-PE(ATT) (100-260V), L-N(100-300V), L-L(300-500V)
- Đo PSC: (L-N/L-L)/PFC(L-PE). PSC 100-500V 50/60Hz, PFC,PFC(ATT) 100-260V 50/60Hz.
- Đo dòng dư: 10,30,100,300,500,1000mA.
- Đo điện trở đất: 20/200/2000Ω.
- Đo thứ tự pha:50-500V 50/60Hz
- Đo điện áp: 25-500V.
- Đo tần số: 45-65Hz.
Continuity |
Range |
20/200/2000Ω (Auto-ranging) |
Open circuit
voltage (DC) |
5V±20% (*1) |
Short circuit
current |
Greater than 200mA |
Accuracy |
±0.1Ω (0 - 0.19Ω)
±2%rdg+8dgt (0.2 - 2000Ω) |
Insulation Resistance |
Range |
20/200MΩ
(Auto-ranging) |
20/200/2000MΩ (Auto-ranging) |
Open circuit
voltage (DC) |
250V+25% -0% |
500V+25% -0% |
1000V+20% -0% |
Rated current |
1mA or greater
@ 250kΩ |
1mA or greater
@ 500kΩ |
1mA or greater
@ 1MΩ |
Accuracy |
±2%rdg+6dgt
(0 - 19.99MΩ)
±5%rdg+6dgt
(20 - 200MΩ) |
±2%rdg+6dgt (0 - 199.9MΩ)
±5%rdg+6dgt (200 - 2000MΩ) |
Loop Impedance |
Function |
L-PE |
L-PE (ATT) |
L-N / L-L |
Rated Voltage |
100 - 260V 50/60Hz |
L-N: 100 - 300V
L-L: 300 - 500V
50/60Hz |
Nominal Test
Current at 0Ω
External Loop:
Magnitude/
Duration (*2) |
20Ω: 6A/20ms
200Ω: 2A/20ms
2000Ω: 15mA/500ms |
L-N: 6A/60ms
N-PE: 10mA/approx. 5s |
20Ω: 6A/20ms |
Range |
20/200/2000Ω
(Auto-ranging) |
20/200/2000Ω
(Auto-ranging)
(L-N < 20Ω) |
20Ω |
Accuracy |
±3%rdg+4dgt(*3)
±3%rdg+8dgt(*4) |
±3%rdg+6dgt (*3)
±3%rdg+8dgt(*4) |
±3%rdg+4dgt (*3)
±3%rdg+8dgt(*4) |
PSC (L-N / L-L) / PFC (L-PE) |
Function |
PSC |
PFC |
PFC (ATT) |
Rated Voltage |
100 - 500V 50/60Hz |
100 - 260V 50/60Hz |
|
Nominal Test
Current at 0Ω
External Loop:
Magnitude/
Duration (*5) |
6A/20ms |
6A/20ms
2A/20ms
15mA/500ms |
L-N: 6A/60ms
N-PE: 10mA/approx. 5s |
Range |
2000A/20kA Auto-Ranging |
Accuracy |
PSC / PFC accuracy is derived from measured loop impedance
specification and measured voltage specification |
RCD |
Function |
X1/2 |
X1 |
X5 |
Ramp |
Auto |
Trip current
setting |
10/30/100/300/
500/1000mA |
10/30/
100mA |
10/30/
100/300/
500mA |
Depending on the
accuracy at each
function.
Measurement sequence:
X1/2 0°→X1/2 180°
→X1 0°→X1 180°
→X5 0°→X5 180°
Measurements with
x5 are not carried out
for RCDs with
nominal current of
100mA or more. |
Trip current
Duration |
2000ms |
G: 550ms
S: 1000ms |
410ms |
Goes up by
10% from
20% to
110%
G:300ms/
S:500ms
X10 times |
Rated Voltage |
230V+10%-15% 50/60Hz |
Accuracy |
AC Type:
-8% - -2%
A Type:
-10% - 0% |
AC Type: +2% - +8%
A Type: 0% - +10% |
AC Type: ±4%
A Type: ±10% |
Trip time: ±1%rdg+3dgt |
RCD (Uc) |
Function |
UC |
Rated Voltage |
230V+10% - 15% 50/60Hz |
Range |
100.0V |
Test current |
≤ 1/2IΔn (max150mA) |
Accuracy |
+5% - +15%rdg, ±8dgt |
Earth |
Range |
20/200/2000Ω Auto-Ranging |
Accuracy |
20Ω: ±3%rdg+0.1Ω
200/2000Ω: ±3%rdg+3dgt (Auxiliary earth resistance 100±5%) |
Phase Rotation |
Rated Voltage |
50-500V 50/60Hz |
Remarks |
Correct phase sequence: are displayed "1.2.3" and recycle mark
Reversed phase sequence: are displayed "3.2.1" and recycle mark |
Volts |
Function |
Volts |
Frequency |
Rated Voltage |
25 - 500V, 45 - 65Hz |
Measuring range |
25 - 500V |
45 - 65Hz |
Accuracy |
±2%rdg+4dgt |
±0.5%rdg+2dgt |
Applicable standards |
IEC 61010-1 CAT III 300V (500V L to L) Pollution degree 2, IEC 61010-031,
IEC 61557-1, 2, 3, 4, 5, 6, 7, 10, IEC 60529 (IP40), IEC 61326 (EMC) |
Power source |
LR6 X 8 |
Dimensions |
136(L) X 235(W) X 114(D)mm |
Weight |
1350g (including batteries.) |
Included Accessories |
7188A (Distribution board fuse test lead set)
7196A (Test leads with remote control switch)
7218A (Power cord [EU]) (*6)
7228A (Earth resistance test leads)
8032 (Auxiliary earth spikes)
8212-USB (USB adaptor with KEW Report (Software))
9142 (Carrying case)
9121 (Shoulder strap)
Cord case, Buckle, Battery, Instruction manual |
Optional Accessories |
8212-RS232C (RS232C adaptor with KEW Report (Software)) |
(*1): Voltages are output when measurement resistance is under 2100 ohm.
(*2): at 230V
(*3): 230V+10%-15%
(*4): voltages except for (*3)
(*5): at 230V
(*6): 7187A (Power cord [UK]), 7221A (Power cord [SA]), 7222A (Power cord [AU])
Tác giả bài viết: Namphatvq
Nguồn tin: Catalogue Kyoritsu