Deprecated: preg_replace(): The /e modifier is deprecated, use preg_replace_callback instead in /home/kyoritsuvietnam.com/public_html/includes/countries.php on line 10
Kyoritsu 5410 - Kyoritsu, Kyoritsu Việt Nam: Đồng hồ vạn năng, Ampe kìm, Đồng hồ chỉ thị pha, Máy đo ánh sáng, Máy đo nhiệt độ, Máy thử điện áp, Thiết bị kiểm tra dòng rò, Thiết bị thử điện áp, Thiết bị phân tích điện

Kyoritsu 5410

Đồng hồ đo dòng dư Kyoritsu 5410 dùng để kiểm tra độ nhạy của CP mang lại an toàn cho các thiết bị và con người khi có dòng điện rò chạy qua. Hiển thị số.
Kyoritsu 5410

Kyoritsu 5410

  • Đo lường thời gian ngắt của RCD: Tiến hành thử nghiệm các dòng còn lại không hoạt động được đánh giá Phạm vi 1/2 ×, đo thời gian chuyến đi RCD × 1 × 5 Ranges.
  • Đo dòng ngắt: Đo dòng ngắt bằng cách thay đổi dòng tự động.
  • Kiểm soát phép đo: Cho phép một người dùng để giữ Kiểm tra khuyến mãi với cả hai bàn tay của mình bằng cách khóa nút Test. Đo lường sẽ tự động bắt đầu khi điện áp chính được phát hiện.
  • Đo điện áp: Thực hiện một phép đo liên tục của điện áp ở chế độ stand-by ở mỗi dải.
  • Tự động xác định điện áp tiếp xúc.
  • Chống nước và bụi theo tiêu chuẩn IP54.
  • Có đèn nền


THÔNG SỐ KỸ THUẬT:

Measurement of RCD trip time - Measurement of trip out current
Range × 5 × 1 × 1/2 AUTO RAMP(mA)
Rated Voltage 100V±10%
200V-10%~+32%
400V±10%
50/60Hz
Test current 15/30/50/100mA 15/30/50/100/200/500mA 15/30/50/100/200/500mA
Measuring range Testing time
0ms~200ms
Testing time
0ms~2000ms
Testing time
0ms~2000ms
40% - 110% of lΔn
(goes up by 5%)
Testing time
300ms × 15steps
Accuracy
(Trip Time)
1%rdg±3dgt 1%rdg±3dgt 1%rdg±3dgt Test Current at each step
-4%~+4%

Accuracy
(Trip Time)

+2%~+8%dgt +2%~+8%dgt -8%~-2%dgt

Voltage Measurement
Measuring range 80V~450V 50/60Hz
Accuracy 2%rdg±4dgt
Applicable standards IEC 61010-1 Pollution degree2 CAT III 300V / CAT II 400V
IEC 61010-031
IEC 61557-1, 6
IEC 60529 (IP54)
Display 1999 counts (3 1/2digits), Large LCD
Operating temperature & humidity range 0ºC - 40ºC, relative humidity 85% (no condensation)
Storage temperature & humidity range -20ºC - 60ºC, relative humidity 85% (no condensation)
Insulation resistance 50MΩ or more / 1000V (between electrical circuit and enclosure)
Sleep Function (1)Automatically enters Sleep mode in 3 minutes after the last switch operation (current consumption 75µA). This function doesn't work at voltage measurements. To exit from the Sleep mode, set the Function switch to OFF position once, and re-set it to the Range at which a measurement to be conducted. 
(2) Backlight turns off in 1 minute after it lights up.
Power source DC 12V / Size AA battery R6 (SUM-3) × 8 pcs.
Dimensions 167(L)×186(W)×89(D)mm
Weight Approx. 965g (including batteries)
Possible number of Measurements 1200 times or more
(measure every 30 seconds at ×1/2 Range, lΔn=100mA)
Included Accessories 7128A (Test leads)
7129A (Test lead with alligator clip)
8017 (Long pin) × 2
Cord case, 9121 (Shoulder strap), Instruction manual,
Size AA battery R6 (SUM-3) × 8pcs.

(*) Only the RCD type G (without trip out time-delay) can be tested at Auto Ramp Test,
type S (time-delay) cannot be tested.


Tác giả bài viết: Namphatvq

Nguồn tin: Catalogue Kyoritsu

Tổng số điểm của bài viết là: 1969 trong 394 đánh giá
Click để đánh giá bài viết

Những tin cũ hơn

 

Bình Luận Trên Face Book Của bạn